#Genisys scan tool 12 volt power supply full

Lockout Time Maintain Specified Voltage A low or erratic power supply could result in impaired burner operation, severe delayed ignition or an explosion inside the heat exchanger resulting in a burn and/or asphyxiation hazard. Table 1 - Model Guide Beckett GeniSys 12V Control Part No. If the red control wire is left powered without a battery charging system, it can drain a standard 45 Amp hour automotive battery in two to four weeks.

#Genisys scan tool 12 volt power supply full

CAUTION Electrical Ratings Do Not Use This Control Above 5.5 GPH Inputs: Voltage: 12 Vdc nominal (11 to 16 Vdc) Current: 160 ma nominal (500 ma max at 16 Vdc)* Enable Load: 40mA at 12 Vdc Outputs: Motor: 12 Vdc, 20 full load amps (FLA), 100 locked rotor amps (LRA) Igniter: 12 Vdc, 5 A Solenoid Valve: 12 Vdc, 2 A Lockout Alarm: 12 Vdc, 2A * The 7556 control draws 60-75mA in the standby state. It can provide interrupted or intermittent duty ignition, and it has a 15 second lockout time on flame failure.Р”Сћ Features Welded Relay Protection Limited Relight Valve-On Delay / Motor-Off Delay (Field programmable with Beckett s Contractor Tool) 15 Second Lockout Time Interrupted Ignition Communication Port Lockout Alarm Output Specifications Do Not Use This CAUTION Control in an Application that is Not Within the Ratings Listed in This Section. It has 12 volt enable input compatible with mechanical and high limit switches. The GeniSys TM 12V is used with a suitable cad cell flame sensor to control the oil burner motor, igniter, and optional solenoid valve. 1 PARTS & ACCESSORIES GeniSys 12V Model 7556 Advanced 12 Vdc Burner Control Description / Applications The Beckett GeniSys TM 12V Advanced Burner Control is a 12 Vdc primary safety control for oil burners used in special applications including, but not limited to, water heaters, pressure washers, crack sealers and portable heaters having firing rates less than 5.5 GPH.